Mechanical Home >> Lab Facilities

MECHANICAL ENGINEERING LAB DETAILS (III SEMESTER)

SNO

NAME OF THE LAB/CODE

EQUIPMENTS AVAILABLE

 

 

 

 

1

 

 

 

 

Mechanical testing and Quality Control Lab/22035

 

EQIUPMENT:
1.Universal Testing Machine,
2.Rockwell’s Hardness Testing Machine
3. Torsion testing machine
4. Deflection testing arrangement
5. Impact testing machine
6. Tension testing arrangements
7. Shear testing machine
8. Vernier caliper
9. Metallurgical Microscope
10. Sample Specimen for ferrous & non- ferrous (Identification)
11. For LPT
12. Magnetic particle test equipment
13. Belt polishing machine
14. Lapping machine

 

 

 

 

 2

 

 

 

 

FLUID POWER PRACTICAL/22036

 

EQIUPMENT:

1.The Bernoulli’s Apparatus
2. An Open tank fitted with a small orifice
3. A Centrifugal pump having the discharge line with venturimeter.
4. An arrangement to find friction factor.
5. A reciprocating pump with an arrangement for collecting data to find out the efficiency and plot the.
characteristics curves.
6. A centrifugal pump with an arrangement for collecting tank to find out the efficiency and plot the characteristics curves.
7. A impulse turbine with an arrangement for calculating data to find out the efficiency – Kalpan Turbine.
8. A reaction turbine with an arrangement for collecting data to find out the efficiency.
9. Pneumatic Trainer Kit.
10. Hydraulics Trainer Kit.

LAB DETAILS (IV SEMESTER)

SNO

NAME OF THE LAB/CODE

EQUIPMENTS AVAILABLE

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

MANUFACTURING TECHNOLOGY – I LAB/22045

 

Turning:

  1. Center Lathe 4 ½ ‘ Bed length
  2. Vernier Caliper
  3. Vernier Height Gauge
  4. Snap gauge
  5. Gear tooth Vernier
  6. Steel Rule
  7. Outside and Inside Calipers
  8. Thread gauge
  9. Bevel Protractor
  10. Jenny Caliper
  11. Dial Gauge with Magnetic Stand
  12. Marking Gauge

 

Welding:

  1. Arc welding booth – 2 No’s with oil /air cooled welding transformer with accessories
  2. Gas welding unit (Oxygen and acetylene cylinder)
  3. Face shield
  4. Spot welding machine

 

Foundry:

  1. Cope box
  2. Drag box
  3. Core box
  4. Runner & riser
  5. Moulding board
  6. Patterns

 

 

 

 

 

 

2

 

 

 

 

METROLOGY & MEASUREMENT AND MACHINE TOOL
TESTING PRACTICAL/22046

 

1. Vernier caliper 0.02mm accuracy
2. Micrometer 0.01mm accuracy
3. Vernier Height gauge 0.02mm accuracy
4. Sine Bar
5. Slip Gauge
6. Inside Micrometer 0.01mm accuracy
7. Bevel protractor
8. Gear Tooth Vernier caliper

  1. Pitch gauge mm & inch set
  2. Digital Micrometer 0.001mm accuracy
  3. Vernier Depth gauge
  4. Sample Specimen
  5. Magnetic stand with dial indicator
  6. Straight edge
  7. Squares
  8. Split level
  9. Test Mandrels for each machines

 

3

 

COMPUTER AIDED MACHINE DRAWING PRACTICAL/22044

 

1. Personal computer (With latest processor to suit Auto CAD) – 60 No’s
2. MS Windows OS – 60 No’s
3. AutoCAD software (release 2000 or above) – 60 users

LAB DETAILS (V SEMESTER)

SNO

NAME OF THE LAB/CODE

EQUIPMENTS AVAILABLE

 

 

 

 

 

1

 

 

 

 

 

THERMAL ENGINEERING PRACTICAL/22055

 

1. Open cup apparatus
2. Close cup apparatus
3. Redwood viscometer
4. Say bolt viscometer
5. 4 stroke petrol engine Model
6. 4 stroke diesel engine Model
7. 2 stroke petrol engine Model
8. Petrol engine of any make with following arrangements
9. Diesel engine of any make of any make with following arrangements
10.Multi -cylinder petrol engine of any make with Morse test setup
11.Air compressor with set up for conducting volumetric efficiency test
12.Refrigeration Testing Kit
13.Guarded Plate Apparatus

 

 

 

2

 

 

 

MANUFACTURING TECHNOLOGY –II lab/22056

 

MACHINES:

  1. Vertical milling machine/ vertical milling attachment in Universal Milling Machine

2. Universal Milling Machine with indexing head
3. Surface Grinding Machine (Horizontal)
4. Cylindrical Grinding machine
5. Tool and Cutter grinder

Equipments & Tools:

1. Milling Cutter (2 Module cutter) & accessories
2. Milling Machine Handle and required accessories

LAB DETAILS (VI SEMESTER)

SNO

NAME OF THE LAB/CODE

EQUIPMENTS AVAILABLE

 

 

1

 

Computer Integrated Manufacturing Practical/22064

 

1. Personal computer (Pentium processor)
2. Off line CNC Lathe and Milling simulation software
3. CNC Turning Machine
4. CNC Milling Machine
5. Laser Printer

 

2

 

Process Automation Practical/22065

 

1. Programmable Logic Controller (PLC) Trainer Kit with
a) Solenoid operated DVCs
b) Pneumatic Double Acting cylinders with limit switches
Stepper motor

Lab Details (General Engineering)

SNO

NAME OF THE LAB/CODE

EQUIPMENTS AVAILABLE

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

Work Shop Practice Lab/22009

 

Fitting

  1. 14” Bench vice
  2. 12” Flat Rough file
  3. 12” Flat smooth file
  4. 10” Try angular file
  5. 8” Half round file
  6. 8” Square file
  7. 10” Round file
  8. 150 mm Try square
  9. 150 mm Steel rule
  10. 6 mm Dot punch
  11. 6 mm Center punch
  12. Hacksaw Frame
  13. Ball Pan ½ lbs Hammer
  14. 8.5 mm Drill Bit
  15. M8 tap set
  16. M10 tap set
  17. Bench drilling machine
  18. 2’ x 1 ½’ Surface plate
  19. Scriber
  20. Tap wrench

WIRING

  1.  Insulated handle cutting pliers
  2.  Insulated handle screw driver
  3.  Pound hammer
  4.  Wire Cutter
  5.  250V Line Tester
  6.  Poker
  7.  Connecting Screw driver
  8.  2x1½ Wiring board

 

Lab Details

SNO

EQUIPMENTS

USAGE

1

VERNIER CALIPER

A vernier caliper is used to take measurements that are accurate to within .001 of an inch or .02 of a millimeter, depending whether the vernier is imperial or metric.

2

SHAPER MACHNE

A shaper is a type of machine tool that uses linear relative motion between the work piece and a single-point cutting tool to machine a linear tool path. Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical

3

UNIVERSAL TESTING MACHINE

“A universal testing machine is used to test the tensile stress and compressive strength of materials. It is named after the fact that it can perform many standard tensile and compression tests on materials, components, and structures.” 

4

MILLING MACHINE

A machine that uses a multi-toothed milling cutter to remove metal from the work piece surface to create flat and angular surfaces and grooves.

5

VERNIER HEIGHT GAUGE

Used for measurement of various depth of holes, heights of steps. Also used in inspection department of tool rooms for highly accurate measurement of jigs & fixture of die work Base of measuring faces are hardened & lapped.

6

SINE BAR

Sine bars used in conjunction with slip gauges constitute a very good device for the precise measurement of angles

7

FEELER GAUGE

Feelers gauges are a bunch of fine thickened steel strips with marked thickness which are used to measure gap width or clearance between surface and bearings

8

MICROMETER

It is a fine precision tool which is used to measure small distances and is more accurate than the venire caliper. Another type is a large micrometer caliper which is used to measure large outside diameter or distance.

9

DIAL GAUGE

Dial gauge is utilized in different tools as stated above and can be separately used to measure the trueness of the circular object, jumping of an object etc.

10

VERNIER DEPTH GAUGE

A depth gauge is used to measure the depth of a slot, hole or any other surface of an object. It can be of scale, dial or digital type

11

BEVEL ANGLE PROTECTOR

Digital Universal Protractors are used for inspection and implementation of level, plumb, slopes and angles in metal fabrication and sub-structures. Our range of protractors features digital electronic display, which provides vertical or horizontal angels

12

BORE GAUGE

We offer our client bore gauges used as measuring or transfer tools in the process of accurately measuring holes

13

SNAP GAUGE

Snap gages are used in production settings where specific diametrical or thickness measurements must be repeated frequently with precision and accuracy.

14

CRANKSHTAF

A crankshaft drives the flywheel, and torque converter of your engine, thus harnessing your engine torque. the parts include the piston rods, and crank rods

15

CAMSHAFT

In internal combustion engines with pistons, the camshaft is used to operate poppet valves. It then consists of a cylindrical rod running the length of the cylinder bank with a number of oblong lobes protruding from it, one for each valve. The cam lobes force the valves open by pressing on the valve, or on some intermediate mechanism as they rotate.

16

SOLENOID VALVE

A solenoid valve is an electromechanical valve for use with gas or liquid. The valve is controlled by electric current through a solenoid.

17

CNC

CNC means Computer Numerical Control. This means a computer converts the design produced by Computer Aided Design software

18

CNC TURNING

CNC turning machine used to machine complex contour shapes in round jobs

19

CNC MILLING

Cnc milling used to cut complex profile cut in flat jobs

20

AIR COMPRESSOR

An air compressor is a machine that is capable of converting electrical power into kinetic energy, specifically by utilizing compressed air. When this air is released in a quick burst, it releases an amount of kinetic energy that can be harnessed for a number of purposes, including pneumatic device activation, air transfer (such as filling a tire), and cleaning operations

21

GEAR TOOTH VERNIER CALIPER

Gear tooth thickness is measured by using gear tooth vernier caliper.

22

REDWOOD VISCOMETER

A viscometer (also called viscometer) is an instrument used to measure the viscosity of a fluid.

23

SPRIT LEVEL

A spirit level, bubble level or simply a level is an instrument designed to indicate whether a surface is horizontal (level) or vertical (plumb). Different types of spirit levels may be used by carpenters, stonemasons, bricklayers, other building trades workers, surveyors,

24

TRI SQUARE

A try square is a woodworking or a metal working tool used for marking and measuring a piece of wood.

25

MACHINE VICE

A machine vice is a device used to hold a piece of work when operating a milling machine or drill press

26

KNUCKLE JOINT

A knuckle joint is used to connect the two rods which are under the tensile.

27

TURBINE

A turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work.

28

CENTRIFUGAL PUMP

The Centrifugal Pump is one of the most widely used pumps in the wastewater treatment industry.

29

SPUR GEAR

spur gears are used because there are many things such as bicycles that can’t exist without a spur gear

30

VALVE

Valves have many uses, including controlling water for Irrigation, industrial uses for controlling processes

31

DRILLING MACHINE

Drilling machines use a drilling tool that has cutting edges at its point. This cutting ... machine must use a sense of feel while feeding the cutting tool into the work.

32

TOOL & CUTTER GRINDER

A tool and cutter grinder is used to sharpen milling cutters and tool bits along with a host of other cutting tools.

33

RUNNER ,RISER

Runner a channel for the metal to get to the negative space left by the pattern. Riser .Because the riser is larger, it will cool slower and feed liquid metal to the shrinking

34

TAIL STOCK

The lathe tail stock is used to support a long work piece from the other end, with the use of a center

35

COLLET CHUCK

This quick-change collet system uses a special handling tool to compress the rear of the end of the collet so it can be inserted into the chuck body.

36

ROCKWELL HARDNESS MACHINE

Hardness testing equipment for use on metals, plastics, rubber and special materials to the entire principal.

37

PLASTICS

Plastics are used to manufacture everyday products such as beverage containers, toys, and furniture

38

JIGS &FIXTURES

The jigs and fixtures are the economical ways to produce a component in mass. So jigs ... processes supported by use of jigs and fixtures maintain a consistent.

39

LATHE

Lathe is the father of machine used to produced circular jobs manually

40

CAPSTAN LATHE

It is used in mass production company, more than one tool fixed.

41

BENCH VICE

It is used to clamp the work piece manually

42

SLOTTING MACHINE

To produce a internal & external keyway

43

PLANNER MACHINE

Machining  the large work piece

44

CYLINDRICAL GRINDING MACHINE

Grinding cylindrical jobs in high precision.

45

SURFACE GRINDING MACHINE

Grinding the flat surface in accuracy

46

SPOT WELDING

This welding used for weld a sheet metals

47

ARC WELDING

Metal can be joints in permanent

48

FOUR STROKE DIESEL ENGINE

Performance analysis to engine


MIT Polytechnic